XF20 Mod Flats/Flounder rig build

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
puppydrumn
Active Poster
Active Poster
Posts: 239
Joined: Sun Feb 14, 2016 10:06 am
Location: Bayboro, NC

Re: XF20 Mod Flats/Flounder rig build

Post by puppydrumn » Tue Feb 21, 2017 9:31 pm

cape_fisherman wrote:
Tue Feb 21, 2017 9:00 pm
I know you said you would wall off the tank compartment, but will that be enough to stop fumes from entering the battery side?
As per my understanding, fuel and batteries cannot be in the same compartment. My plan is to completely seal off the seat compartment area, install a externally vented fuel tank with an external fill tube. Tank would be vented externally through the console. Would like other opinions.. thanks


Capt. TW

puppydrumn
Active Poster
Active Poster
Posts: 239
Joined: Sun Feb 14, 2016 10:06 am
Location: Bayboro, NC

Re: XF20 Mod Flats/Flounder rig build

Post by puppydrumn » Tue Mar 07, 2017 6:50 am

Build is up for sale. Make offer!!!! Most everything to complete is included. Boat is 3/4 complete
Capt. TW

Jaysen
Very Active Poster
Very Active Poster
Posts: 717
Joined: Wed Aug 05, 2015 7:59 am
Location: St Helena Island, SC

Re: XF20 Mod Flats/Flounder rig build

Post by Jaysen » Tue Mar 07, 2017 7:42 am

Allow me to be the first to say "boooo!"

That out of the way, I hope the move is a good event. Who ever buys your build will have a very good base to work from. Good luck!

Dr. Pete
New Poster
New Poster
Posts: 1
Joined: Sun Jan 22, 2017 6:51 pm
Location: Texas

Re: XF20 Mod Flats/Flounder rig build

Post by Dr. Pete » Tue Mar 07, 2017 10:39 am

Sad to know but We have fish and water in Texas

puppydrumn
Active Poster
Active Poster
Posts: 239
Joined: Sun Feb 14, 2016 10:06 am
Location: Bayboro, NC

Re: XF20 Mod Flats/Flounder rig build

Post by puppydrumn » Tue Mar 07, 2017 1:45 pm

I have over $4000 in it and Will take $2500 obo if anyone is interested..... must sell in the next two weeks
Capt. TW

puppydrumn
Active Poster
Active Poster
Posts: 239
Joined: Sun Feb 14, 2016 10:06 am
Location: Bayboro, NC

Re: XF20 Mod Flats/Flounder rig build

Post by puppydrumn » Wed Mar 08, 2017 12:29 pm

Will take $1500

You can reach me at: Two 5 two 567 five 700
Capt. TW

Fishwater
* Bateau Builder *
* Bateau Builder *
Posts: 307
Joined: Tue Oct 18, 2005 7:45 pm
Location: H-town

Re: XF20 Mod Flats/Flounder rig build

Post by Fishwater » Fri Mar 10, 2017 5:51 pm

What part of the country are you in?

Jeff
Site Admin
Site Admin
Posts: 1284
Joined: Fri Apr 29, 2016 12:17 pm
Location: Vero Beach

Re: XF20 Mod Flats/Flounder rig build

Post by Jeff » Fri Mar 10, 2017 7:35 pm

Fishwater, he is in Bayboro, North Carolina!! Jeff

Parkrat
Frequent Poster
Frequent Poster
Posts: 75
Joined: Tue Oct 06, 2015 7:56 pm
Location: McKinney, TX

Re: XF20 Mod Flats/Flounder rig build

Post by Parkrat » Sat Mar 11, 2017 6:48 pm

Sucks you gotta sell. Would be hard to move it to Texas.

Yes, we have great fishing in Texas. Especially, around Matagorda and Sargent area.

User avatar
BB Sig
Active Poster
Active Poster
Posts: 274
Joined: Thu Sep 29, 2011 9:20 am
Location: Monticello, FL
Contact:

Re: XF20 Mod Flats/Flounder rig build

Post by BB Sig » Mon Mar 13, 2017 11:51 am

Parkrat wrote:
Sat Mar 11, 2017 6:48 pm
Sucks you gotta sell. Would be hard to move it to Texas.
It's not that hard to move it if you have a trailer. I transported a GT23 that only had one frame tacked into the hull. Just need a trailer and some sort of cover. I hope you find a buyer. :(

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest