So is it intended that stringers get glassed to the hull before placing the frame or after - or does it matter?
Before would result in long strips of tape down each side of the stringer but would probably require relieving the frame notches. After would mean fitting tape inside each of the 'egg crate' boxes/ This has to be done later to bond the frames to the stringers/ hull anyways.
Last edited by APLJaK on Sun Aug 05, 2012 1:05 pm, edited 1 time in total.
Thanks for the info. I looked at the builders notes but could not find it. That is the method I used so I am happy that there appears to be a consensus. 41 deg Celsius (106 degF) outside today. Did about 4 hours of epoxy/glass outside and feel like i am going to die . Hope it cools off soon!