Search found 206 matches

by Dan_Smullen
Mon Feb 17, 2020 9:14 pm
Forum: Builder's Power Boats
Topic: C19 in Richmond, VA
Replies: 117
Views: 25946

Re: C19 in Richmond, VA

Thanks gents. Full send on fairing now.

Plan is to focus on getting bottom panels ready for primer, the. Apply rub rail, the. Prep sides for primer.

Transom, I believe, is all but ready, just needs a lick with 80–>120.
by Dan_Smullen
Mon Feb 17, 2020 8:21 pm
Forum: Builder's Power Boats
Topic: FS18 Straight Sheer, Round Chine
Replies: 194
Views: 24266

Re: FS18 Straight Sheer, Round Chine

Ah ha! Nice pocket with the router. That will be a tight little sandwich.
by Dan_Smullen
Sun Feb 16, 2020 7:32 pm
Forum: Woods Designs and Multihulls
Topic: Skoota without plywood
Replies: 7
Views: 9230

Re: Skoota without plywood

FG, I can’t get over the size and scale of your project. Although, I believe your up for it!

Again, best of luck!
by Dan_Smullen
Sun Feb 16, 2020 2:16 pm
Forum: Builder's Power Boats
Topic: C19 in Richmond, VA
Replies: 117
Views: 25946

Re: C19 in Richmond, VA

Man, I've been messing with these for nearly 6 weeks. Glad to have them glassed over. Reid, the 10oz. was perfect. It laid nicely over a small radius on the corner, <3/8" I believe. Voids around them were filled with woodflour/cabosil thickened epoxy after wetting, before glassing. Happy with the wa...
by Dan_Smullen
Sat Feb 15, 2020 9:20 pm
Forum: Core Materials: Plywood, Foam core and Honeycomb
Topic: Beer barrel staves
Replies: 10
Views: 189

Re: Beer barrel staves

I gotcha. I misunderstood. Redwood is a gem. Enjoy!
by Dan_Smullen
Sat Feb 15, 2020 5:33 pm
Forum: Core Materials: Plywood, Foam core and Honeycomb
Topic: Beer barrel staves
Replies: 10
Views: 189

Re: Beer barrel staves

Great material. 'Im a wood nerd and would have a hard time cutting it up.

Are your ripping it parallel to the curve? On the band saw?

Do you have a pic of the one before you cut it up?
by Dan_Smullen
Thu Feb 13, 2020 4:15 pm
Forum: Power Boats
Topic: Happy Birthday Eric
Replies: 10
Views: 189

Re: Happy Birthday Eric

Happy Birthday! Enjoy some scones!
by Dan_Smullen
Tue Feb 11, 2020 1:47 pm
Forum: Builder's Power Boats
Topic: FS18 Straight Sheer, Round Chine
Replies: 194
Views: 24266

Re: FS18 Straight Sheer, Round Chine

Nice! Also useful, I suspect, in getting people to talk!
by Dan_Smullen
Sun Feb 09, 2020 7:18 pm
Forum: Builder's Power Boats
Topic: C19 in Richmond, VA
Replies: 117
Views: 25946

Re: C19 in Richmond, VA

Thank you as always, Jeff! Good advice from the boys on another thread made me to think enough to break out the big clamps. Got the chine rails glued in place on both sides. Glued onto a wet layer of 12oz, with a generous helping of wood flour thickened epoxy between the cloth and the rail. Used a f...
by Dan_Smullen
Sat Feb 08, 2020 7:32 pm
Forum: Power Boats
Topic: Panga 20 Build
Replies: 503
Views: 44713

Re: Panga 20 Build

Well done!

She looks great upside down, but right side up will be good to see too!