PX14 Deckjig question

Boats up to 15' for oars, power or sail. Please include the boat type in your question.
Post Reply
User avatar
gonandkarl
* Bateau Builder *
* Bateau Builder *
Posts: 782
Joined: Sat Mar 16, 2013 10:25 am
Location: Wels,Austria,Europe

PX14 Deckjig question

Post by gonandkarl » Wed Oct 04, 2017 8:01 am

Hi,
Unfortunately I do not understand the dimensions for the deck jig. Its says in the update notes:
Deck Jig
Reading from the left of the drawing the measurements are: 5, 140(horizontal dimension), 30, 100,
150, 183, 195, ALL 500 (horizontal dimension), 195, 180, 145, 90, 140 (horizontal dimension), 70
The cutout in the jig doesn't have to be too accurate as the ply will form a fair shape.
I assume these measurements are millimeters and of what drawing are we talking of the one on sheet 1on the right hand side ? The first lot are seven numbers and the second 6 numbers and what do these 3 times mentioning of horizontal dimension mean, are the ones following the horizontal dimension vertical dimensions and in the middle of it all stands ALL 500 does that refer to the stations ?

I am utterly confused as I actually think with these measurements I should be able to produce the hole for the hull on the flat chipboard.

I hope Richard Wood can give me an answer as it is his design.

Greetings from Karl


All pictures of Micro Petrel AD14 and FS13 :

http://gallery.bateau2.com/index.php?cat=87433

User avatar
gonandkarl
* Bateau Builder *
* Bateau Builder *
Posts: 782
Joined: Sat Mar 16, 2013 10:25 am
Location: Wels,Austria,Europe

Re: PX14 Deckjig question

Post by gonandkarl » Sat Oct 07, 2017 12:11 pm

Hi,
I hope Richard Wood can give me an answer as it is his design.
Greetings from Karl
All pictures of Micro Petrel AD14 and FS13 :

http://gallery.bateau2.com/index.php?cat=87433

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest