Sintes 21 Rebuild

Questions about boat repairs with our resins and fiberglass: hull patches, transoms and stringers, foam, rot etc.
gonandkarl
Very Active Poster
Very Active Poster
Posts: 721
Joined: Sat Mar 16, 2013 10:25 am
Location: Wels,Austria,Europe

Re: Sintes 21 Rebuild

Post by gonandkarl » Sun Jun 18, 2017 2:24 am

Hi,
I am impressed what you power boat builders all have to mount and I think at the same time about you guys behind these massive efforts for finishing boats that look then like perfect miracles out of professional boat builder shops which I could witness at last years meet. For all newbies planning to go go to the meet there are a lot of nice people to talk to and as David said no buttheads whatsoever. I wish I could go there again.
Greetings from Karl


All pictures of Micro Petrel AD14 and FS13 :

http://gallery.bateau2.com/index.php?cat=87433

Fuzz
* Bateau Builder *
* Bateau Builder *
Posts: 2279
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: Sintes 21 Rebuild

Post by Fuzz » Sun Jun 18, 2017 2:56 am

Aripeka Angler wrote:
Sat Jun 17, 2017 5:28 pm
Ok, here are the parts from the winch kit.
which parts are you missing?
All three of those. But now I know what I need. Thank you for taking the time to dig those out and show them to me.
I can even read the part numbers :D

Fuzz
* Bateau Builder *
* Bateau Builder *
Posts: 2279
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: Sintes 21 Rebuild

Post by Fuzz » Sun Jun 18, 2017 2:59 am

gonandkarl wrote:
Sun Jun 18, 2017 2:24 am
Hi,
I am impressed what you power boat builders all have to mount and I think at the same time about you guys behind these massive efforts for finishing boats that look then like perfect miracles out of professional boat builder shops which I could witness at last years meet. For all newbies planning to go go to the meet there are a lot of nice people to talk to and as David said no buttheads whatsoever. I wish I could go there again.
Greetings from Karl
Yep lots of stuff to mount on power boats. But I am not too sure the sail boats are much easier. A simple little skiff with just a pull start outboard sure sounds good at times.

Jaysen
* Bateau Builder *
* Bateau Builder *
Posts: 1452
Joined: Wed Aug 05, 2015 7:59 am
Location: St Helena Island, SC

Re: Sintes 21 Rebuild

Post by Jaysen » Sun Jun 18, 2017 7:16 am

Building from a JM design... heck yeah! The build is a little more complicated than power but it is all spelled out. All us blow boat types need to guess at are a few points to secure lines. You power boaters... jack plates, trim tabs, fuel, electrical, props... no thanks. Give me the wind and oars for simple.

My back would appreciate a motor though.

Fuzz
* Bateau Builder *
* Bateau Builder *
Posts: 2279
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: Sintes 21 Rebuild

Post by Fuzz » Sun Jun 18, 2017 11:49 am

Jaysen I did a little sailing when I was young. I learned two things. 1 sailing is no fun without wind. 2 wind on the water in Alaska and its cold no matter the time of year. I read someplace that sailboats should stay below the 40th latitude and I tend to agree.

Jaysen
* Bateau Builder *
* Bateau Builder *
Posts: 1452
Joined: Wed Aug 05, 2015 7:59 am
Location: St Helena Island, SC

Re: Sintes 21 Rebuild

Post by Jaysen » Sun Jun 18, 2017 11:58 am

Problem is sailing east. Got to go north to cross the big water. Or waaaaay south.

Aripeka Angler
* Bateau Builder *
* Bateau Builder *
Posts: 4873
Joined: Thu Sep 13, 2007 9:13 pm
Location: Dade City, Florida

Re: Sintes 21 Rebuild

Post by Aripeka Angler » Sun Jun 18, 2017 3:03 pm

Fuzz wrote:
Sun Jun 18, 2017 2:56 am
Aripeka Angler wrote:
Sat Jun 17, 2017 5:28 pm
Ok, here are the parts from the winch kit.
which parts are you missing?
All three of those. But now I know what I need. Thank you for taking the time to dig those out and show them to me.
I can even read the part numbers :D
You want me to find a set of all three for you?
It's no trouble at all, I can bring them up in my suitcase.
Richard
Completed boats...XF20 "Red Alert", Aripeka Angler's Strip Canoe
Currently building...PY12 Kayak and FS18 "Bare Bones"
If there is magic on this planet, it is contained in water. - Loren Eiseley

Fuzz
* Bateau Builder *
* Bateau Builder *
Posts: 2279
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: Sintes 21 Rebuild

Post by Fuzz » Sun Jun 18, 2017 7:48 pm

[/quote]

You want me to find a set of all three for you?
It's no trouble at all, I can bring them up in my suitcase.
[/quote]

Thank you very much for the kind offer but you have plenty to do. Now that I know what I need I can order them. I hate trying to order stuff sight un seen. But you even showed me part numbers so even I can not screw this up................I think :lol:

User avatar
cape man
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 4328
Joined: Sun Jan 20, 2008 12:02 pm

Re: Sintes 21 Rebuild

Post by cape man » Fri Jun 23, 2017 9:32 am

This came to my email this morning. That just sucks!
http://www.wideopenspaces.com/black-bea ... n=20170623
The world always seems brighter when you've just made something that wasn't there before - Neil Gaiman

Fuzz
* Bateau Builder *
* Bateau Builder *
Posts: 2279
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: Sintes 21 Rebuild

Post by Fuzz » Fri Jun 23, 2017 1:08 pm

Really sad event. The bear has been located and put down. Like always there are conflicting reports about what really happened. The bottom line is a young man lost his life while participating in what should have been a fun event. :( The blacks tend to be more dangerous for people than browns for a couple of reasons. One there are more of them so you are more likely to run into one. And two people are closer to a blacks size so you are viewed as a bigger threat. The browns treat you as a pest, give you a good swat and move on.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest