HM19 in Romania

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 3644
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: HM19 in Romania

Post by Fuzz » Tue Nov 14, 2017 10:01 pm

Looks like you are using a welded cradle to build on. That is a great idea and you will be very happy with it before you are done.



BogdanFerariu
Frequent Poster
Frequent Poster
Posts: 117
Joined: Mon Aug 01, 2016 1:29 pm
Location: Romania

Re: HM19 in Romania

Post by BogdanFerariu » Wed Nov 15, 2017 2:30 am

Fuzz wrote:
Tue Nov 14, 2017 10:01 pm
Looks like you are using a welded cradle to build on. That is a great idea and you will be very happy with it before you are done.
Yes. it has 8 wheels and I can move it easily.
My worries are about the flip.

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 3644
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: HM19 in Romania

Post by Fuzz » Wed Nov 15, 2017 2:45 am

Every one worries about the flip but it turns out to be no problem. The hull will still be very light at that point but it will be very strong also. When you get to that point ask and you will get lots of good advise from those who have done it.

blueflood
Very Active Poster
Very Active Poster
Posts: 745
Joined: Mon Feb 04, 2013 9:06 am
Location: Ottawa, ON, Canada

Re: HM19 in Romania

Post by blueflood » Wed Nov 15, 2017 8:26 am

...what Fuzz said ! Don't fret over the flip. It may look daunting it this stage but believe the guys here...it is not a big deal. I spent way too much time worrying and when the time came, I said "that was it" ?? :D :doh: It is light, strong and easy to do with a few helpers.

Marc

BogdanFerariu
Frequent Poster
Frequent Poster
Posts: 117
Joined: Mon Aug 01, 2016 1:29 pm
Location: Romania

Re: HM19 in Romania

Post by BogdanFerariu » Sun Nov 19, 2017 11:10 am

Image
My filleting skills are improving.

Image

Shortened and reinforced motorwell sides.
Image

Image

Modified C frame
Image

Eric1
Very Active Poster
Very Active Poster
Posts: 2168
Joined: Tue Aug 19, 2014 3:17 pm
Location: Spartanburg,S.C.

Re: HM19 in Romania

Post by Eric1 » Sun Nov 19, 2017 3:07 pm

Very Nice! Build On!!

User avatar
peter-curacao
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 7484
Joined: Mon Mar 24, 2008 1:29 pm
Location: Curaçao Dutch Caribbean

Re: HM19 in Romania

Post by peter-curacao » Sun Nov 19, 2017 3:44 pm

Very clean work 8)

BogdanFerariu
Frequent Poster
Frequent Poster
Posts: 117
Joined: Mon Aug 01, 2016 1:29 pm
Location: Romania

Re: HM19 in Romania

Post by BogdanFerariu » Sun Dec 10, 2017 9:54 am

Some pictures.
I have more boxes, to suport the sole, because I won't use foam.
Much more work than the FS14, and much more materials too.
I have used almost 180 m biaxial tape.

There is a fuel tank, 43 l.

Image

Image

Image

Image

Image

Image

User avatar
peter-curacao
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 7484
Joined: Mon Mar 24, 2008 1:29 pm
Location: Curaçao Dutch Caribbean

Re: HM19 in Romania

Post by peter-curacao » Sun Dec 10, 2017 3:49 pm

That looks all great 8) only thing that I'm not sure about is the support you glued under that cleat in the second picture, it may create a unwanted pressure point,maybe better put a backing plate under it? again not sure though :doh:

BogdanFerariu
Frequent Poster
Frequent Poster
Posts: 117
Joined: Mon Aug 01, 2016 1:29 pm
Location: Romania

Re: HM19 in Romania

Post by BogdanFerariu » Sun Dec 10, 2017 4:19 pm

peter-curacao wrote:
Sun Dec 10, 2017 3:49 pm
That looks all great 8) only thing that I'm not sure about is the support you glued under that cleat in the second picture, it may create a unwanted pressure point,maybe better put a backing plate under it? again not sure though :doh:
I am going to make some hatches there, so I can install a backing plate, but I'm not sure that it is necesary. The bottom is made of 2 layers of 10mm plywood, so the first layer is the backing plate. And on top it will be the chair.
I'll think about it anyway, thanks for pointing it.

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests