Old School PH16******Splashed

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
User avatar
peter-curacao
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 7607
Joined: Mon Mar 24, 2008 1:29 pm
Location: Curaçao Dutch Caribbean

Re: Old School PH16

Post by peter-curacao » Mon Sep 03, 2012 1:54 pm

Half round holes at the bottom of the stringers and frames so water can escape from the compartments to the bilge area, not required if you foam the compartments.



User avatar
stickystuff
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 2219
Joined: Tue Aug 27, 2002 1:00 am
Location: Crystal River, Fl.
Location: Crystal River, Fl.

Re: Old School PH16

Post by stickystuff » Tue Sep 04, 2012 6:20 am

A limber hole if it's called right is a drain hole in the bottom of your bulkheads. It allows any water that gets in to drain to the transom area so it can be pumped out.
Capt. Ken Owens

A little saw dust, a little glue, and a lot of love, and she will float.

User avatar
super dave
Frequent Poster
Frequent Poster
Posts: 32
Joined: Sat Jun 18, 2011 6:30 pm
Location: Royal Palm Beach, FL

Re: Old School PH16

Post by super dave » Mon Nov 12, 2012 12:20 pm

Posting a few pics of the latest progress. Completed the cleats on the tops of the stringers, added rigging tubes and limber holes.

Image

Image

Image

Image

Image

User avatar
chopperman
* Bateau Builder *
* Bateau Builder *
Posts: 481
Joined: Wed Jun 10, 2009 5:04 pm
Location: Deltona, FL

Re: Old School PH16

Post by chopperman » Sun Nov 18, 2012 4:22 pm

I haven't seen your build for a while. Very clean and professional work. Coming along nicely 8)
Completed: Phantom 16 viewtopic.php?t=19940

User avatar
chicagoross
* Bateau Builder *
* Bateau Builder *
Posts: 1927
Joined: Wed Aug 29, 2007 3:42 am
Location: Guam, USA, middle of the Pacific Ocean

Re: Old School PH16

Post by chicagoross » Mon Nov 19, 2012 7:00 am

I second the clean and professional - your cleats look like furniture joints - very clean! Nice work!

cottontop
* Bateau Builder *
* Bateau Builder *
Posts: 902
Joined: Wed Dec 31, 1969 7:00 pm
Location: Ocala,FL

Re: Old School PH16

Post by cottontop » Mon Nov 19, 2012 7:13 am

Great work! Very clean and neat. John

SmokyMountain
* Bateau Builder *
* Bateau Builder *
Posts: 553
Joined: Sat May 02, 2009 6:58 pm
Location: Maryville, TN

Re: Old School PH16

Post by SmokyMountain » Mon Nov 19, 2012 7:14 am

I'll give that a third. Very nice clean work!! 8) Keep it up.

User avatar
super dave
Frequent Poster
Frequent Poster
Posts: 32
Joined: Sat Jun 18, 2011 6:30 pm
Location: Royal Palm Beach, FL

Re: Old School PH16

Post by super dave » Sun Jan 20, 2013 1:43 pm

Here's pics of the latest progress. Added foam and mounted the sole in the front three compartments.

Image

Image

Image

Image

Image

Image

User avatar
topwater
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 3131
Joined: Tue Oct 30, 2007 6:27 pm
Location: Port Charlotte
Location: Florida

Re: Old School PH16

Post by topwater » Sun Jan 20, 2013 5:58 pm

Nice work putting the sole and glass down. Just think all that hard work underneath never to be seen again.
Novi 23 finally launched !

BassMunn

Re: Old School PH16

Post by BassMunn » Mon Jan 21, 2013 3:43 pm

Nice clean work Super Dave, brings back memories (the boat not the clean work :lol: )

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests