Eric's C21

Power Boats only. Please include the boat type in your question.
Eric1
Very Active Poster
Very Active Poster
Posts: 1721
Joined: Tue Aug 19, 2014 3:17 pm
Location: Spartanburg,S.C.

Re: Eric's C21

Post by Eric1 » Mon Mar 20, 2017 7:35 pm

csotelo wrote:
Mon Mar 20, 2017 4:37 pm
Hey,

It´s looking very good!

I used the spray paint after I saw you doing!

It helped a lot, but the fairing drank some paint and the points where the fairing board just touch it stayed colored.

Regards,

Carlos Sotelo
I'm happy it is working for you. Thank for the compliment too!



Eric1
Very Active Poster
Very Active Poster
Posts: 1721
Joined: Tue Aug 19, 2014 3:17 pm
Location: Spartanburg,S.C.

Re: Eric's C21

Post by Eric1 » Mon Mar 20, 2017 7:55 pm

I was able to get a few hours in after lunch today. I hope I'm not boring y'all with sanding pictures but that's all I'm doing now. Fill,sand,repeat. Anyway I got the first eight feet on the side sanded with 80 grit paper. I'm glad I decided to fill and fair this again. Between the Quick Fair and the blue paint I can clearly see the lows.

Image

Close up:

Image

I also sanded the entire bottom half down with 120 grit. I still have work to do here also.

Image

Bow lows reflecting light.

Image

The guide coat powder came in today but I did not get to use it yet.

User avatar
AmbitiousRookie
Frequent Poster
Frequent Poster
Posts: 82
Joined: Thu Apr 10, 2008 8:12 pm
Location: INDIANA

Re: Eric's C21

Post by AmbitiousRookie » Mon Mar 20, 2017 8:05 pm

It's looking pretty good to me. How big is you CMM :lol:

Eric1
Very Active Poster
Very Active Poster
Posts: 1721
Joined: Tue Aug 19, 2014 3:17 pm
Location: Spartanburg,S.C.

Re: Eric's C21

Post by Eric1 » Mon Mar 20, 2017 8:09 pm

AmbitiousRookie wrote:
Mon Mar 20, 2017 8:05 pm
It's looking pretty good to me. How big is you CMM :lol:
We own two. Small Brown & Sharp MicroVal and a much larger one in it's own lab.

Eric1
Very Active Poster
Very Active Poster
Posts: 1721
Joined: Tue Aug 19, 2014 3:17 pm
Location: Spartanburg,S.C.

Re: Eric's C21

Post by Eric1 » Wed Mar 22, 2017 9:38 am

I thought I posted this yesterday but I guess I forgot to submit it.
I spent all of yesterday sanding, First caught up this side panel with 80 grit, then sanded the whole panel with 120 grit.
I was wore out.

Image

Then my brother wanted to show me the way he would fill so I cut him loose!
He seems to think I'm putting it on a bit thin, I don't know. This was another 30 grams.

Image

First thing today I sanded the second fill out. It looks pretty good. I'm going to spend time with a bright light and do fill work today.

Image

I'm going to start with this corner transition, Tired of looking at it. I built a dam from G10 and peel ply and got it in place.
I plan to round this but I think this is the easiest way to fill it.

Image

Dam from back side

Image

Jeff
Site Admin
Site Admin
Posts: 2525
Joined: Fri Apr 29, 2016 12:17 pm
Location: Vero Beach

Re: Eric's C21

Post by Jeff » Wed Mar 22, 2017 11:45 am

Great progress Eric!!! And yes, that is a whole bunch of sanding!!! Jeff

Eric1
Very Active Poster
Very Active Poster
Posts: 1721
Joined: Tue Aug 19, 2014 3:17 pm
Location: Spartanburg,S.C.

Re: Eric's C21

Post by Eric1 » Wed Mar 22, 2017 12:22 pm

Thanks for the support Jeff! You know I like posting here. The support from the forum is amazing! 8) :D 8)

Ok, I just finished the second fill of Quick Fair. I tried to only apply it to the low spots.
The big picture after another 150 grams.

Image

Detail of corner fill at transom.

Image

That's most likely all for today. Oldest daughter is meeting me for lunch then I have to help her get her submission ready for Teen Talent.
She entered photography and it has to be turned in tonight. It has to be printed and in a frame so we have to go get that done.

Fuzz
* Bateau Builder *
* Bateau Builder *
Posts: 2758
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: Eric's C21

Post by Fuzz » Wed Mar 22, 2017 2:20 pm

You are gaining on it even if it does not feel like it at times. Just keep telling yourself this to will end :D

TomW1
Very Active Poster
Very Active Poster
Posts: 1728
Joined: Sun Apr 19, 2015 10:57 pm
Location: Bryson City, NC

Re: Eric's C21

Post by TomW1 » Wed Mar 22, 2017 2:49 pm

Looking good Eric. While fairing is a PITA what you get out of it is what you put in to it. The more the better. :D
Restored Mirror Dinghy, Bought OD18 built by CL, Westlawn School of Yacht Design courses.

Eric1
Very Active Poster
Very Active Poster
Posts: 1721
Joined: Tue Aug 19, 2014 3:17 pm
Location: Spartanburg,S.C.

Re: Eric's C21

Post by Eric1 » Wed Mar 22, 2017 3:20 pm

Fuzz wrote:
Wed Mar 22, 2017 2:20 pm
You are gaining on it even if it does not feel like it at times. Just keep telling yourself this to will end :D
Ok Fuzz I will, but you're responsible. All my Doctor tell me to ignore the voices in my head! :lol:
TomW1 wrote:
Wed Mar 22, 2017 2:49 pm


Looking good Eric. While fairing is a PITA what you get out of it is what you put in to it. The more the better. :D
Thank You too Tom. It is, just so much I can get done in a day. Hey on a Very positive note, After sanding all day yesterday I did not have any rotator cuff pain. Maybe the worst of that is behind me. :wink:

Post Reply

Who is online

Users browsing this forum: OrangeQuest and 3 guests