LB Clamping boards

Power Boats only. Please include the boat type in your question.
Dougster
* Bateau Builder *
* Bateau Builder *
Posts: 2992
Joined: Tue Jun 06, 2006 11:05 pm
Location: Texas

LB Clamping boards

Post by Dougster » Tue Jul 04, 2006 6:11 pm

I'm not sure on these.

1) The nesting diagram suggests one is smaller than the other, but the Frames page shows only one dimensioned and says two required, implying they are the same size.

2) I can't find what the camber is on the bottom edge of them. Do I just wait and scribe it to fit?

3) The construction page shows a thick frame against the transom, presumable these two clamping boards glued together?


Will he ever get started Dougster Smile



Dougster
* Bateau Builder *
* Bateau Builder *
Posts: 2992
Joined: Tue Jun 06, 2006 11:05 pm
Location: Texas

Post by Dougster » Wed Jul 05, 2006 4:48 pm

Sure would like a little help here. It's the LB22. I'm trying to get started cutting the stations and just don't get the clamping board thing.

Dougster

User avatar
chrisobee
Very Active Poster
Very Active Poster
Posts: 1175
Joined: Fri May 30, 2003 1:00 am
Location: Bowling Green, Ohio

Post by chrisobee » Wed Jul 05, 2006 6:25 pm

The folks who do technical support do not monitor this sections of the board. Try enter a request for help in the Plans and Building / Powerboats section.

Dougster
* Bateau Builder *
* Bateau Builder *
Posts: 2992
Joined: Tue Jun 06, 2006 11:05 pm
Location: Texas

Post by Dougster » Wed Jul 05, 2006 9:24 pm

Thanks a bunch. I'll post over there.

Dougster

Dougster
* Bateau Builder *
* Bateau Builder *
Posts: 2992
Joined: Tue Jun 06, 2006 11:05 pm
Location: Texas

Post by Dougster » Wed Jul 05, 2006 9:26 pm

Well now I'm confused. This is plans and building/power boats. What's up?

Dougster

User avatar
ArizonaBuilder
Very Active Poster
Very Active Poster
Posts: 1192
Joined: Wed Dec 31, 1969 7:00 pm
Location: Phoenix, Arizona

Post by ArizonaBuilder » Wed Jul 05, 2006 9:35 pm

Dougster wrote:Well now I'm confused. This is plans and building/power boats. What's up?

Dougster
Crisobee was having a senior moment. :wink:

He meant to say that Jacques and team don't usually monitor the Builders Progress section
Beer is living proof that God loves us and wants us to be happy.
-- Benjamin Franklin

Dougster
* Bateau Builder *
* Bateau Builder *
Posts: 2992
Joined: Tue Jun 06, 2006 11:05 pm
Location: Texas

Post by Dougster » Wed Jul 05, 2006 9:46 pm

I had a senior moment trying to post this thread somewhere else, looking for where I already was :doh: I'll just be patient, maybe I have'nt asked my question very clearly.

Dougster

User avatar
jacquesmm
Site Admin
Site Admin
Posts: 27521
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Re: LB Clamping boards

Post by jacquesmm » Thu Jul 06, 2006 9:49 am

Dougster wrote:I'm not sure on these.

1) The nesting diagram suggests one is smaller than the other, but the Frames page shows only one dimensioned and says two required, implying they are the same size.

Is this the LB22? I don't see the words ... ng number?


2) I can't find what the camber is on the bottom edge of them. Do I just wait and scribe it to fit?

3) The construction page shows a thick frame against the transom, presumable these two clamping boards glued together?


Will he ever get started Dougster Smile
I don't see anything like what you describe, it must be another plan.
Please give us the drawing number, the one in the lower right corner.
Jacques Mertens - Designer
http://bateau.com

User avatar
chrisobee
Very Active Poster
Very Active Poster
Posts: 1175
Joined: Fri May 30, 2003 1:00 am
Location: Bowling Green, Ohio

Post by chrisobee » Thu Jul 06, 2006 11:10 am

Crisobee was having a senior moment. :wink:

He meant to say that Jacques and team don't usually monitor the Builders Progress section
Well I knew what I meant to say even if I didn't say what I meant. er.... something like that.... :doh:

Anyway.... I have junior moments thank you very much. :D

User avatar
ArizonaBuilder
Very Active Poster
Very Active Poster
Posts: 1192
Joined: Wed Dec 31, 1969 7:00 pm
Location: Phoenix, Arizona

Post by ArizonaBuilder » Thu Jul 06, 2006 11:37 am

Anyway.... I have junior moments thank you very much. Very Happy
You don't have to be old to have a senior moment. :) :)
Beer is living proof that God loves us and wants us to be happy.
-- Benjamin Franklin

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests