Flared Bow on C19

Power Boats only. Please include the boat type in your question.
Jwhitakeriii
Active Poster
Active Poster
Posts: 311
Joined: Sun Jun 10, 2018 10:31 pm
Location: Fort Valley Ga

Re: Flared Bow on C19

Post by Jwhitakeriii » Fri Sep 20, 2019 12:38 pm

Dan_Smullen wrote:
Thu Sep 19, 2019 9:22 pm
Cutting molds this weekend. Who’s excited!?!
:-D



Dan_Smullen
Active Poster
Active Poster
Posts: 209
Joined: Tue Aug 13, 2019 3:02 pm
Location: VA

Re: Flared Bow on C19

Post by Dan_Smullen » Fri Sep 20, 2019 4:34 pm

jacquesmm wrote:
Fri Sep 20, 2019 9:36 am
Send me your 3D model and I"ll see if I can help or at least give some advice.
That’s awesome! Thank you for the offer. It’s a Fusion 360 file. Will that work for you? What’s a good email for you? DM maybe?
Last edited by Dan_Smullen on Fri Sep 20, 2019 4:39 pm, edited 1 time in total.

Dan_Smullen
Active Poster
Active Poster
Posts: 209
Joined: Tue Aug 13, 2019 3:02 pm
Location: VA

Re: Flared Bow on C19

Post by Dan_Smullen » Fri Sep 20, 2019 4:36 pm

Marshall Moser wrote:
Fri Sep 20, 2019 10:21 am
Image

This is a "Down East NC" style boat. Almost a dory. Very low deadrise at the transom. Nearly vertical stem. Lots of flare.

I like the look of the flare too. I'll be following with interest. Be sure to post pics of your process.
That’s a sexy girl there. Exactly the style I appreciate.

Harrison Boatworks and Rose Bay Boats are both sources of inspiration for me.

User avatar
jacquesmm
Site Admin
Site Admin
Posts: 27217
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Re: Flared Bow on C19

Post by jacquesmm » Fri Sep 20, 2019 5:25 pm

Dan_Smullen wrote:
Fri Sep 20, 2019 4:34 pm
jacquesmm wrote:
Fri Sep 20, 2019 9:36 am
Send me your 3D model and I"ll see if I can help or at least give some advice.
That’s awesome! Thank you for the offer. It’s a Fusion 360 file. Will that work for you? What’s a good email for you? DM maybe?
My business email is jacques@boatbuildercentral.com.
Fusion can export manyformats. A plain ACAD dwg is perfect.
I would like to compare your developable panels to what Rhino produces.
Let's discuss this by email.

Yes, that boat in the picture is very pretty but it will probably require cold molding.
I have such a design on my list but I work very slowly lately and miss all my deadlines.
Jacques Mertens - Designer
http://bateau.com

Dan_Smullen
Active Poster
Active Poster
Posts: 209
Joined: Tue Aug 13, 2019 3:02 pm
Location: VA

Re: Flared Bow on C19

Post by Dan_Smullen » Mon Sep 23, 2019 12:10 pm

Fuzz wrote:
Thu Sep 19, 2019 10:12 pm
this will be interesting. Make sure to start a build thread and post a ton :D

viewtopic.php?t=64446

8)

Marshall Moser
Active Poster
Active Poster
Posts: 392
Joined: Mon Aug 02, 2010 3:00 pm
Location: Siler City, NC

Re: Flared Bow on C19

Post by Marshall Moser » Mon Sep 23, 2019 2:51 pm

jacquesmm wrote:
Fri Sep 20, 2019 5:25 pm
Yes, that boat in the picture is very pretty but it will probably require cold molding.
I have such a design on my list but I work very slowly lately and miss all my deadlines.
It is a cold molded design. As that is how most of those boats are constructed these days. Of course, they used to be 100% fir with no glass.

Dan_Smullen
Active Poster
Active Poster
Posts: 209
Joined: Tue Aug 13, 2019 3:02 pm
Location: VA

Re: Flared Bow on C19

Post by Dan_Smullen » Mon Sep 23, 2019 4:35 pm

Marshall Moser wrote:
Mon Sep 23, 2019 2:51 pm
jacquesmm wrote:
Fri Sep 20, 2019 5:25 pm
Yes, that boat in the picture is very pretty but it will probably require cold molding.
I have such a design on my list but I work very slowly lately and miss all my deadlines.
It is a cold molded design. As that is how most of those boats are constructed these days. Of course, they used to be 100% fir with no glass.
I recognize the boat from another DIY page, and assumed it was stitch and glue, but perhaps not. I'm not familiar with his building technique.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests