My cx 25

Power Boats only. Please include the boat type in your question.
dalnilo
Frequent Poster
Frequent Poster
Posts: 155
Joined: Tue Sep 06, 2011 8:51 am
Location: sicilia

Re: My cx 25

Post by dalnilo » Sun Sep 20, 2020 4:10 pm

fallguy1000 wrote:
Sun Sep 20, 2020 3:21 pm
I always struggle closing the edges of the 12mm core.
I used the 15mm foam



dalnilo
Frequent Poster
Frequent Poster
Posts: 155
Joined: Tue Sep 06, 2011 8:51 am
Location: sicilia

Re: My cx 25

Post by dalnilo » Sun Sep 20, 2020 4:11 pm

Fuzz wrote:
Sun Sep 20, 2020 1:58 pm
Your foam/glass work sure looks nice. This is going to be a very nice boat :wink:
:D :D :D :D

dalnilo
Frequent Poster
Frequent Poster
Posts: 155
Joined: Tue Sep 06, 2011 8:51 am
Location: sicilia

Re: My cx 25

Post by dalnilo » Sun Sep 20, 2020 4:24 pm

you recommend the single motor to be assembled, from the project it says single 250 double 400,
can I mount a single 300 4 stroke?
what brand?
is the 300 excessive?
what maximum weight should a single motor mounted on a bracket have?

dalnilo
Frequent Poster
Frequent Poster
Posts: 155
Joined: Tue Sep 06, 2011 8:51 am
Location: sicilia

Re: My cx 25

Post by dalnilo » Mon Sep 21, 2020 1:55 pm

dalnilo wrote:
Sun Sep 20, 2020 4:24 pm
you recommend the single motor to be assembled, from the project it says single 250 double 400,
can I mount a single 300 4 stroke?
what brand?
is the 300 excessive?
what maximum weight should a single motor mounted on a bracket have?
I answer myself, I assume that I can also mount a single motor from 250 min to 400 max exactly? it does not change whether single or double.

dalnilo
Frequent Poster
Frequent Poster
Posts: 155
Joined: Tue Sep 06, 2011 8:51 am
Location: sicilia

Re: My cx 25

Post by dalnilo » Wed Sep 23, 2020 12:58 pm

good evening,
I officially ask the designer or whoever for him to be able to answer my question,
I have a doubt I would like to clarify it I think it is important for me and my boat.
I look forward to your answers thank you very much.

User avatar
jacquesmm
Site Admin
Site Admin
Posts: 27572
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Re: My cx 25

Post by jacquesmm » Wed Sep 23, 2020 2:48 pm

You have a choice: single engine or twin.
I recommend a single 250 HP. Check the building thread of Curacao Peter, he was happy with a single 300 HP.
My original recommendation for twins was 280 as in two 140 or 145. Some have installed up to 400 HP (2 x 200 HP) but I find that excessive.
Those recommendations are my opinion. The structure, transom and bottom can take any of those combinations.
Jacques Mertens - Designer
http://bateau.com

dalnilo
Frequent Poster
Frequent Poster
Posts: 155
Joined: Tue Sep 06, 2011 8:51 am
Location: sicilia

Re: My cx 25

Post by dalnilo » Thu Sep 24, 2020 7:59 am

jacquesmm wrote:
Wed Sep 23, 2020 2:48 pm
You have a choice: single engine or twin.
I recommend a single 250 HP. Check the building thread of Curacao Peter, he was happy with a single 300 HP.
My original recommendation for twins was 280 as in two 140 or 145. Some have installed up to 400 HP (2 x 200 HP) but I find that excessive.
Those recommendations are my opinion. The structure, transom and bottom can take any of those combinations.
ok thanks for the clarification

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests