Crabby Patti2 C17

Power Boats only. Please include the boat type in your question.
Jeff
Site Admin
Site Admin
Posts: 5794
Joined: Fri Apr 29, 2016 12:17 pm
Location: Vero Beach

Re: Crabby Patti2 C17

Post by Jeff » Tue Apr 02, 2019 7:59 am

Looking good Crabby Scott!! Jeff



mohrscott
Frequent Poster
Frequent Poster
Posts: 79
Joined: Sat Nov 24, 2018 4:36 pm
Location: Washington

Re: Crabby Patti2 C17

Post by mohrscott » Sat Apr 20, 2019 12:42 am

Ready for first coat of primer!
Attachments
EEB1EB6E-9F06-4351-802D-E92416B08FA4.jpeg

User avatar
BB Sig
Very Active Poster
Very Active Poster
Posts: 984
Joined: Thu Sep 29, 2011 9:20 am
Location: Tallahassee, FL
Contact:

Re: Crabby Patti2 C17

Post by BB Sig » Sat Apr 20, 2019 6:07 am

Boat is getting closer to done!

Your garage is too clean. Did you clean it for the picture? :lol:

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 5838
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: Crabby Patti2 C17

Post by Fuzz » Sat Apr 20, 2019 2:42 pm

Had to of cleaned before pictures. Only Topwater can build and keep a shop spotless :lol:

mohrscott
Frequent Poster
Frequent Poster
Posts: 79
Joined: Sat Nov 24, 2018 4:36 pm
Location: Washington

Re: Crabby Patti2 C17

Post by mohrscott » Sun Apr 21, 2019 12:03 am

You guys don't miss much. Yes, I cleaned it to try to get dust down. But I opened the garage door early this evening to get better light to Prime it. The low angle sun did along the sides and showed a bunch of irregularities I hadn't seen. So back to sanding!

mohrscott
Frequent Poster
Frequent Poster
Posts: 79
Joined: Sat Nov 24, 2018 4:36 pm
Location: Washington

Re: Crabby Patti2 C17

Post by mohrscott » Sun Apr 21, 2019 4:43 pm

Two coats of primer. Did a better job sanding than I thought. Taped off rail area; will glue rail on next. I want to keep that bright so waiting to install.
Attachments
D18A72C3-D06D-4383-811B-2668744FA054.jpeg

mohrscott
Frequent Poster
Frequent Poster
Posts: 79
Joined: Sat Nov 24, 2018 4:36 pm
Location: Washington

Re: Crabby Patti2 C17

Post by mohrscott » Wed May 08, 2019 7:42 pm

Almost ready to paint. Must wait until halibut fishing is done this weekend. 62lbs. &. 52lbs last weekend.
Attachments
BC8B36A2-0464-4EEE-A4C3-C464C00D870F.jpeg
9922182F-C2B0-42EE-83EC-2991F79A97E8.jpeg

Jeff
Site Admin
Site Admin
Posts: 5794
Joined: Fri Apr 29, 2016 12:17 pm
Location: Vero Beach

Re: Crabby Patti2 C17

Post by Jeff » Thu May 09, 2019 7:47 am

Really well done!!! Good luck fishing!!! Jeff

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 5838
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: Crabby Patti2 C17

Post by Fuzz » Thu May 09, 2019 3:31 pm

If you are going to talk about catching fish you got to post pictures of them :D
It is just about time for me to go try to put some halibut in the freezer also.

Jaysen
* Bateau Builder *
* Bateau Builder *
Posts: 4333
Joined: Wed Aug 05, 2015 7:59 am
Location: St Helena Island, SC

Re: Crabby Patti2 C17

Post by Jaysen » Thu May 09, 2019 4:02 pm

Fuzz wrote:
Thu May 09, 2019 3:31 pm
It is just about time for my wife to go try to put some halibut in the freezer also.
I think I fixed it for you :P
Jaysen wrote:
Mon Apr 29, 2019 3:44 pm
I tried to say something but God thought I was wrong and filled my mouth with saltwater. I kept my pie hole shut after that.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest