XF20

Power Boats only. Please include the boat type in your question.
redfish55
Frequent Poster
Frequent Poster
Posts: 53
Joined: Sun Nov 27, 2005 2:21 pm
Location: Albany Ga

XF20

Post by redfish55 » Tue Jan 03, 2006 3:47 pm

Any of you out there want to sell your XF20.



User avatar
gpratt
Active Poster
Active Poster
Posts: 454
Joined: Fri Aug 16, 2002 1:00 am
Location: Orlando, FL

Post by gpratt » Tue Jan 03, 2006 4:11 pm

I would build one for for you. If your interested 407 957-9553.

Steve in Spring Hill
Frequent Poster
Frequent Poster
Posts: 169
Joined: Mon Nov 15, 2004 12:54 pm
Location: out of Bayport Fl.

Post by Steve in Spring Hill » Wed Jan 04, 2006 8:06 am

I'll have one finished in a month or so, all hull panels will be stitched and glued by Fri. Come down and ride in mine to see, nobody believes the tales of running in 2" until they come for a ride!!

This one will have walk gunnels but not the elaborate console / coffin box livewell setup.

Later.............Steve

redfish55
Frequent Poster
Frequent Poster
Posts: 53
Joined: Sun Nov 27, 2005 2:21 pm
Location: Albany Ga

Post by redfish55 » Wed Jan 04, 2006 8:41 am

Steve you realize that there is no way to contact you. Why don't you enable the PM or post your email address in your profile.

I'm planning on using a tiller motor so don't need a console.

User avatar
jacquesmm
Site Admin
Site Admin
Posts: 27315
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Post by jacquesmm » Wed Jan 04, 2006 10:25 am

Just click on the email button under his message, it works, I tried.

Currently, we have three experienced builders producing the XF20 on order: Steve, Gary Pratt and Ken Owens.
If you want your boat for the summer, reserve your slot with them, they have limited productiuon capacity.
Jacques Mertens - Designer
http://bateau.com

gtcoupe
* Bateau Builder *
* Bateau Builder *
Posts: 144
Joined: Tue Nov 22, 2005 3:24 pm
Location: Camano Island Wa

Post by gtcoupe » Wed Jan 04, 2006 10:30 am

Uh, Jacques, there's no email button under Steve's profile! :doh:
Completed: FL12 GV10
Next up: P19!
Doug

User avatar
tech_support
Very Active Poster
Very Active Poster
Posts: 12319
Joined: Wed Dec 31, 1969 7:00 pm
Location: Vero Beach, FL
Contact:

Post by tech_support » Wed Jan 04, 2006 12:51 pm

gtcoupe wrote:Uh, Jacques, there's no email button under Steve's profile! :doh:
I see steve's email link - :doh:

Toni V
Active Poster
Active Poster
Posts: 420
Joined: Sun Aug 01, 2004 6:14 am
Location: Finland

Post by Toni V » Wed Jan 04, 2006 1:32 pm

Shine wrote:
gtcoupe wrote:Uh, Jacques, there's no email button under Steve's profile! :doh:
I see steve's email link - :doh:
I don't.

Gpratt and others have e-mail links, except Jacques.

CET
Frequent Poster
Frequent Poster
Posts: 81
Joined: Sun Oct 23, 2005 9:53 pm

Post by CET » Wed Jan 04, 2006 2:32 pm

jacquesmm wrote:Just click on the email button under his message, it works, I tried.

Currently, we have three experienced builders producing the XF20 on order: Steve, Gary Pratt and Ken Owens.
If you want your boat for the summer, reserve your slot with them, they have limited productiuon capacity.
Jacques - just out of curiosity, are any of these gentlemen building other Bateau models in a production capacity? If so, which ones?

Thanks.

Steve in Spring Hill
Frequent Poster
Frequent Poster
Posts: 169
Joined: Mon Nov 15, 2004 12:54 pm
Location: out of Bayport Fl.

Post by Steve in Spring Hill » Wed Jan 04, 2006 2:34 pm

Checking back in, redfish call me on my cell# 352-586-9648 or in the evenings I'm out in the garage 352-592-1188

I'm open for boat rides most anytime after 2pm weekdays. Weekends give me a few days notice as I take people fishing mostly.

I'll post photo's of the latest one by the weekend. The friend who went in partners with me will give up this boat, as I have enough plywood for another XF20.

I'll propbably cut the panels out on #3 this weekend while tape joints are drying.


Later............Steve

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests