Favorite Boat Building Tools

Post any and all methods for doing things here, if you think you have a good method, that you don't see most builders using
nicogold
New Poster
New Poster
Posts: 6
Joined: Fri Sep 11, 2015 10:14 am
Location: Germany
Contact:

Re: Favorite Boat Building Tools

Post by nicogold » Mon Oct 15, 2018 1:22 pm

Until now I finished two boats, HC16 and OT16, and I used quite a lot of power tools like a cordless drill, jigsaw, circular saw, orbital rectangular sander, multitool, router. All of those tools were useful, but theres just one of the tools I've used, that I would consider essential: the Festool Rotex 150.

https://amzn.to/2yEBxrw

This is a very expensive tool, but it's worth every penny. Because of its unique disc motion, it will remove almost as much material as a belt sander when used with 40-grit or 60-grit-discs, but without any ugly marks in the surface. As long as the sanding disc is not clogged, it will always produce a smooth surface. And it will also sand the paint with 400grit perfectly or polish the final layer of paint.

I don't want to miss it for any future projects.



Fred in Wisc
* Bateau Builder *
* Bateau Builder *
Posts: 941
Joined: Tue May 02, 2006 8:54 pm
Location: Milwaukee WI

Re: Favorite Boat Building Tools

Post by Fred in Wisc » Mon Oct 15, 2018 4:12 pm

Another vote for the Festools. I use an ETS150/5 sander with a CT series dust extractor vacuum. Freaking awesome. Low vibration, nice ergonomic grip, sandpaper lasts a long time with the dust extraction, and the dust extractor eliminates probably 95%+ of the floor and airborne dust from sanding. It ain't a cheap date, but it'll last a LONG time.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest