Corecell M - Plain vs. Cut Pricing and Usage

Please see our tutorials and FAQ before posting.
fallguy1000
Very Active Poster
Very Active Poster
Posts: 1830
Joined: Tue Jan 12, 2010 12:25 am

Re: Corecell M - Plain vs. Cut Pricing and Usage

Post by fallguy1000 » Fri Mar 02, 2018 1:43 pm

u r wrong and comparing wrong sizes apples and oranges and bananas

sorry if I sound mean, but all the prices are straight up and all the gurit is build to order and all the add ons, perforations, cutting, are all upcharges from base prices

you need to call Noah's to get the prices

if there is ever any oddities; it would be based on an inventory they want to move


My boat build is here -------->

viewtopic.php?f=12&t=62495

fallguy1000
Very Active Poster
Very Active Poster
Posts: 1830
Joined: Tue Jan 12, 2010 12:25 am

Re: Corecell M - Plain vs. Cut Pricing and Usage

Post by fallguy1000 » Fri Mar 02, 2018 1:48 pm

Corecell M is sold in 2x4 or 4x8 sheets. A 2x4 panel is 1/4th the size of the full size panels..

When you see the price at $63.01 for the 2x4, if you bought 4 of those; price would be about $252 dollars for the equivalent 4x8 panel which is sold for $225 a panel.

Noah's pricing on the internet is very confusing.

Just call them.
My boat build is here -------->

viewtopic.php?f=12&t=62495

fallguy1000
Very Active Poster
Very Active Poster
Posts: 1830
Joined: Tue Jan 12, 2010 12:25 am

Re: Corecell M - Plain vs. Cut Pricing and Usage

Post by fallguy1000 » Fri Mar 02, 2018 1:50 pm

scrim is shown at $64.50 for a 2x4 panel or would be 258 for a full 4x8 equivalent. Frankly, it will probably cost more than that and the internet price might be low....
My boat build is here -------->

viewtopic.php?f=12&t=62495

Lurker4567
Frequent Poster
Frequent Poster
Posts: 20
Joined: Sun Apr 17, 2016 7:18 pm
Location: Buffalo, NY

Re: Corecell M - Plain vs. Cut Pricing and Usage

Post by Lurker4567 » Fri Mar 02, 2018 2:54 pm

Man, what a brain fart I had when writing the initial post - I got it in my head that the cut stuff is half-sheets when they are (as you point out) in fact quarter-sheets.

fallguy1000
Very Active Poster
Very Active Poster
Posts: 1830
Joined: Tue Jan 12, 2010 12:25 am

Re: Corecell M - Plain vs. Cut Pricing and Usage

Post by fallguy1000 » Fri Mar 02, 2018 4:13 pm

Lurker4567 wrote:
Fri Mar 02, 2018 2:54 pm
Man, what a brain fart I had when writing the initial post - I got it in my head that the cut stuff is half-sheets when they are (as you point out) in fact quarter-sheets.
Totally okay. Talk about making mistakes...lots of conversions done by me.

Corecell requires wetout or you’ll starve the glass-just like plywood. The rate is 0.64kg per cubic meter. I wanted it in ounces per yard. I converted 2.2 pounds per kg...my old friend said the part seems dry about 8 times. Finally checked the math and found the error.

I knew what you did right away. All the best; you passed the first failure test.
My boat build is here -------->

viewtopic.php?f=12&t=62495

User avatar
jacquesmm
Site Admin
Site Admin
Posts: 26276
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Re: Corecell M - Plain vs. Cut Pricing and Usage

Post by jacquesmm » Fri Mar 02, 2018 8:31 pm

Lurker4567 wrote:
Fri Mar 02, 2018 1:01 pm
. . .
I'm thinking about building an ultra low version of the FS14_LS. It would end up more like the SK14 or a giant SUP with an outboard and be completely foam filled with no hatches, etc.
Don't without getting specs from the designer (that's me). There is much more to it than just substituting plywood for foam.
Jacques Mertens - Designer
http://bateau.com

Lurker4567
Frequent Poster
Frequent Poster
Posts: 20
Joined: Sun Apr 17, 2016 7:18 pm
Location: Buffalo, NY

Re: Corecell M - Plain vs. Cut Pricing and Usage

Post by Lurker4567 » Sat Mar 03, 2018 11:36 am

I'm going to start a new thread for design in the appropriate section.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest