FS17 Build

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
Post Reply
Parkrat
Frequent Poster
Frequent Poster
Posts: 148
Joined: Tue Oct 06, 2015 7:56 pm
Location: McKinney, TX

FS17 Build

Post by Parkrat » Mon Oct 26, 2015 7:20 pm

I decided to build a boat. :) I heard it costs more to build one so it's the only way to go. I think the beer will be the most expensive part. Something I've always wanted to do and I don't have anybody to tell me no. :lol:

I received the plans and started today. I'll post pictures later. Made some supports on casters and got the strongback together. Just need to square it up! Can't find any plywood local so I'll be ordering it in the next couple days.

My plan is center console with a 50hp. I'm hoping I'll be done in 2 years.
Last edited by Parkrat on Thu Nov 24, 2016 2:12 pm, edited 2 times in total.



Parkrat
Frequent Poster
Frequent Poster
Posts: 148
Joined: Tue Oct 06, 2015 7:56 pm
Location: McKinney, TX

Re: FS 17 Build

Post by Parkrat » Mon Oct 26, 2015 7:49 pm

Here are some pics. This will be a slow build.

Image

Image

I couldn't find any perfect 2x6s so I had to put a few supports in the middle to make sure it was 32" all the way down.

Image

DAVE LUDICK
Frequent Poster
Frequent Poster
Posts: 93
Joined: Mon Mar 09, 2009 3:46 am
Location: Port Elizabeth

Re: FS 17 Build

Post by DAVE LUDICK » Tue Oct 27, 2015 1:07 am

Good luck with your build, I shall follow it with interest. Judging by the prep work I see, I am sure it is going to be a quality build. The FS 17 interests me and I would possibly consider building one when I have completed my GV15 which is close to completion. The dreaded BBV virus is a wicked disease, it is accompanied by that social ill "boat porn" which I am sure most builders on this site have contracted.
Good luck again.
Dave

User avatar
jacquesmm
Site Admin
Site Admin
Posts: 27538
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Re: FS 17 Build

Post by jacquesmm » Tue Oct 27, 2015 10:00 am

It looks good and sturdy but maybe a little high to reach the top (keel).
Jacques Mertens - Designer
http://bateau.com

Parkrat
Frequent Poster
Frequent Poster
Posts: 148
Joined: Tue Oct 06, 2015 7:56 pm
Location: McKinney, TX

Re: FS 17 Build

Post by Parkrat » Tue Oct 27, 2015 11:34 am

Thanks Dave. Yes, all I think about day and night are boats. I plan on using it to run around the lake and do some bay fishing.

jacquesmm, you might be right. I have long arms so hopefully, that helps :) It's about 36" from the floor to the top of the saw horses.

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 6852
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: FS 17 Build

Post by Fuzz » Tue Oct 27, 2015 11:58 am

Hey Parkrat,
Welcome to the club :D
One thing to point out is how high your strongback is. Add the height of the FS-17 from the sheer to the keel to what you have now and then think about working with heavy tools there. As it is now you are going to be working on the bottom at close to 6 foot in the air. But maybe you are 7 foot tall? What do I know :lol: Either way have fun as this is what it is all about. And ask lots of questions, with pictures of course, and you will receive lots of friendly and quality advise.
Fuzz

Parkrat
Frequent Poster
Frequent Poster
Posts: 148
Joined: Tue Oct 06, 2015 7:56 pm
Location: McKinney, TX

Re: FS 17 Build

Post by Parkrat » Tue Oct 27, 2015 12:37 pm

No, not 7' tall. Only 6'.

Maybe I should consider lowering it a hair. :lol:

User avatar
Cracker Larry
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 22480
Joined: Fri Mar 11, 2005 3:39 pm
Location: Savannah, GA

Re: FS 17 Build

Post by Cracker Larry » Tue Oct 27, 2015 3:24 pm

Welcome to the virus, known as BBV. It's incurable once you have it.

I would also lower it at least a foot. You will be glad you did.
Completed GF12 X 2, GF16, OD18, FS18, GF5, GF18, CL6
"Ships are the nearest things to dreams that hands have ever made." -Robert N. Rose

User avatar
remedy32
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 573
Joined: Fri Aug 22, 2008 9:03 pm
Location: Old Lyme, CT
Location: Old Lyme, CT USA

Re: FS 17 Build

Post by remedy32 » Tue Oct 27, 2015 4:55 pm

I would also lower it at least a foot. You will be glad you did.
Make that 18". You'll appreciate that as soon as you put the first frame in place. You need access to all the stitches as you pull it together. And just getting the long panels in place will be much easier too.

Bill

User avatar
jacquesmm
Site Admin
Site Admin
Posts: 27538
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Re: FS 17 Build

Post by jacquesmm » Tue Oct 27, 2015 6:50 pm

How about cutting the largest frame, setting it up and see how you can reach the top?
Jacques Mertens - Designer
http://bateau.com

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests