De25 build

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
User avatar
Pat4
Frequent Poster
Frequent Poster
Posts: 158
Joined: Tue Jan 16, 2007 3:46 pm
Location: Hank, Netherlands
Location: The Netherlands, Europe

Re: De25 build

Post by Pat4 » Fri Jan 19, 2018 3:29 pm

phpBB [media]
Attachments
F295B692-0F94-4A97-99FE-2494657DB1E1.jpeg



silentneko
Very Active Poster
Very Active Poster
Posts: 1314
Joined: Sat Nov 06, 2010 7:10 pm
Location: Lakeland

Re: De25 build

Post by silentneko » Fri Jan 19, 2018 4:43 pm

Sounds good to me!
Built: 15ft Skiff, 16ft Skiff, Modified Cheap Canoe.....FS17 coming soon!

User avatar
jacquesmm
Site Admin
Site Admin
Posts: 27573
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Re: De25 build

Post by jacquesmm » Fri Jan 19, 2018 5:52 pm

About the 12mm bottom: did it take the shape easily? I am thinking of the bow mostly, the middle and stern are flat. I would have used 12 mm but it was at the limit of the max. bending radius at the bow.
BTW, since you are Dutch, I suppose you use Bruynzeel?

PS: I remember the Biesbosch area, very nice except .
Jacques Mertens - Designer
http://bateau.com

User avatar
Pat4
Frequent Poster
Frequent Poster
Posts: 158
Joined: Tue Jan 16, 2007 3:46 pm
Location: Hank, Netherlands
Location: The Netherlands, Europe

Re: De25 build

Post by Pat4 » Fri Jan 19, 2018 6:24 pm

The 12 mm didn’t shape easy at all.. I pulled the sheets a little bit more together every day.
It took about a week to get them together.
Had to use tyraps 12 mm 1000nm; 100kg. The lighter ones simply broke. At the end it was okay but during bending i was afraid that the plywood would crack.
But because of the added length i wanted a thicker bottom.

Allthough I work at Bruynzeel ( unfortunatily not the plywood division) and i still can get a good discount it was cheaper to use Joubert ocoume marine plywood. good quality as well.

User avatar
Pat4
Frequent Poster
Frequent Poster
Posts: 158
Joined: Tue Jan 16, 2007 3:46 pm
Location: Hank, Netherlands
Location: The Netherlands, Europe

Re: De25 build

Post by Pat4 » Fri Jan 19, 2018 6:29 pm

silentneko wrote:
Fri Jan 19, 2018 4:43 pm
Sounds good to me!
:D

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 6922
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: De25 build

Post by Fuzz » Sat Jan 20, 2018 1:14 am

Please post lots of pictures as you go. I love the DE-25 design. In many ways I think it fits my area better than any of the others here.

User avatar
Pat4
Frequent Poster
Frequent Poster
Posts: 158
Joined: Tue Jan 16, 2007 3:46 pm
Location: Hank, Netherlands
Location: The Netherlands, Europe

Re: De25 build

Post by Pat4 » Tue Jan 23, 2018 2:49 pm

Some more progress..
phpBB [media]
Attachments
5EBC2787-8DF2-4C9C-8CD6-2D9E955C4C9C.jpeg

User avatar
Pat4
Frequent Poster
Frequent Poster
Posts: 158
Joined: Tue Jan 16, 2007 3:46 pm
Location: Hank, Netherlands
Location: The Netherlands, Europe

Re: De25 build

Post by Pat4 » Tue Jan 23, 2018 2:50 pm

phpBB [media]
Attachments
958FBBF6-BAB8-421E-B7D2-A11B6F6E1733.jpeg

User avatar
Pat4
Frequent Poster
Frequent Poster
Posts: 158
Joined: Tue Jan 16, 2007 3:46 pm
Location: Hank, Netherlands
Location: The Netherlands, Europe

Re: De25 build

Post by Pat4 » Tue Jan 23, 2018 3:01 pm

This is looking forward into the enclosed motor well.
On the right ( next to where the motor is coming) is an opening. This opening will lead to a door In the transom. So there will be an easy acces to the swimplatform.
Floor in this area is about the same height as the height of the outboard.

Excuse my pore english: don’t know all the words to explain exactly :?

User avatar
Pat4
Frequent Poster
Frequent Poster
Posts: 158
Joined: Tue Jan 16, 2007 3:46 pm
Location: Hank, Netherlands
Location: The Netherlands, Europe

Re: De25 build

Post by Pat4 » Tue Jan 23, 2018 3:13 pm

phpBB [media]
Attachments
F1893832-B5AB-4969-8CF9-5EAB66D9CB10.jpeg

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 2 guests