Woods Skoota 32DM

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 6299
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: Woods Skoota 32DM

Post by Fuzz » Wed Feb 20, 2019 10:54 pm

In this case I feel no need nor desire to be the "winner" :help:



Woods Designs
Frequent Poster
Frequent Poster
Posts: 159
Joined: Mon Nov 10, 2014 8:20 am
Location: UK and PNW

Re: Woods Skoota 32DM

Post by Woods Designs » Thu Feb 21, 2019 9:49 am

I took this photo from my Skoota 28 just now!! See what you have to look forward to!

Richard Woods
hopetown feb20.jpg

Jeff
Site Admin
Site Admin
Posts: 6310
Joined: Fri Apr 29, 2016 12:17 pm
Location: Vero Beach

Re: Woods Skoota 32DM

Post by Jeff » Thu Feb 21, 2019 9:51 am

Beautiful Richard!! Enjoy, Jeff

Bogieman
* Bateau Builder *
* Bateau Builder *
Posts: 1818
Joined: Wed Jun 15, 2016 12:20 pm
Location: Myrtle Beach

Re: Woods Skoota 32DM

Post by Bogieman » Thu Feb 21, 2019 11:48 am

Nice!

And feel better Fallguy

fallguy1000
Very Active Poster
Very Active Poster
Posts: 5092
Joined: Tue Jan 12, 2010 12:25 am

Re: Woods Skoota 32DM

Post by fallguy1000 » Thu Feb 21, 2019 12:06 pm

Thanks Richard!

So, where is that photo precisely?

We want to look on the map.
My boat build is here -------->

viewtopic.php?f=12&t=62495

Woods Designs
Frequent Poster
Frequent Poster
Posts: 159
Joined: Mon Nov 10, 2014 8:20 am
Location: UK and PNW

Re: Woods Skoota 32DM

Post by Woods Designs » Thu Feb 21, 2019 3:56 pm

It's Hopetown in the Abacos. And the lighthouse is the worlds last clockwork powered kerosene lit light. It is all cast iron, made in the UK in late 1880's and floats on a bath of mercury. You (I) can push the light with one finger even though it weighs 4000lbs (I think)

We have been here many times over the last 15 years. I draw and do boat projects during the week. And at weekends teach junior sailing in 420's, Sunfish and Optimists. I also race on cruisers and the Abaco Rage, a traditional Class A Bahamian sloop (check it out here https://www.youtube.com/watch?v=5DF2VSOxoXU) and race Sunfish.

Richard Woods

fallguy1000
Very Active Poster
Very Active Poster
Posts: 5092
Joined: Tue Jan 12, 2010 12:25 am

Re: Woods Skoota 32DM

Post by fallguy1000 » Sat Feb 23, 2019 2:26 pm

Well, progress update on the build.

1. We taped one of the in floor gutters to the hull; the other two require ladder work.
2. We vac-laminated two of the four deck panels that will close the hull on Friday.
3. Spoke with Furuno dealer about electronics.
4. Spoke with Richard via email about some cabin redesign.
5. Holed the port hull for the beam socket and holed the garage interior for the beam insertion; still have siding, but 30" of snow out there.

Monday I meet with the surgeon and expect to be cleared to go up ladders. He told me no ladders until this meeting.

Next week, we will work on various smaller projects and the two bigger projects of laminating the beam sockets and building the large deck sections to enclose between BH3 to BH5. March will be finalizing all small projects and April will be cabin build start. Once the cabin base is done; the starboard hull is going outside.

No pictures or videos as our outputs were poor this week to weather and hip.
My boat build is here -------->

viewtopic.php?f=12&t=62495

bobmaes
Frequent Poster
Frequent Poster
Posts: 27
Joined: Wed Sep 22, 2010 8:48 pm
Location: Brielle, NJ

Re: Woods Skoota 32DM

Post by bobmaes » Mon Feb 25, 2019 8:31 pm

I wish you the best with your health. There are so many pages to your thread and I don't have as much time for these things as I would like. Please forgive me if this sounds stupid, but please tell me what boat you are building. All your work looks first rate. Thanks for being so generous with your time sharing your work in such detail.

fallguy1000
Very Active Poster
Very Active Poster
Posts: 5092
Joined: Tue Jan 12, 2010 12:25 am

Re: Woods Skoota 32DM

Post by fallguy1000 » Mon Feb 25, 2019 8:52 pm

I am building the Richard Wood's Skoota 32 demountable powercat.

The designer's site is here.

http://www.sailingcatamarans.com/index. ... -skoota-33

Today, I had very little time. I trimmed the two deck panels laminated last week and to fit. They are actually jist the inside of a cabinet, but required first in the order of operations.
E29E833B-22ED-49BF-9A74-2D359736AE26.jpeg
F9F92401-4784-4F06-B5C4-7728717173B5.jpeg
The last picture is a beam socket through the boat.
AC31094B-BB15-4FBE-9212-97FE639D9CCF.jpeg
My boat build is here -------->

viewtopic.php?f=12&t=62495

User avatar
OrangeQuest
Very Active Poster
Very Active Poster
Posts: 2825
Joined: Tue Aug 28, 2018 1:14 pm
Location: Houston, Texas

Re: Woods Skoota 32DM

Post by OrangeQuest » Tue Feb 26, 2019 5:53 am

So with a ladder in the pictures does that mean you got the all clear for being on ladders? Hope so and you are healing well. How is the conversations going with Richard and cabin lay out? I am excited to start seeing mock ups! Also the snow is still keeping you from finishing a cut in the workshop wall? 8O If I am reading that correctly. We don't have snow here but I am hoping the snow melts soon! :)
"that it isn't just an ordinary sort of boat. Sometimes it's a Boat, and sometimes it's more of an Accident. It all depends." "Depends on what?" "On whether I'm on the top of it or underneath it."
A. A. Milne

Post Reply

Who is online

Users browsing this forum: Netpackrat and 5 guests